Skip to content
BilIoT
EN
Request a demo
← All solutions Product: SRD

GSM relay and remote control: by SMS when there is no internet

Switch the two relays and four 24 V outputs of the SRD from your phone. If the wired network and Wi-Fi go down the device moves to the mobile line; with no internet at all it carries out SMS commands from authorised numbers.

Request a demo
GSM relay and remote control: by SMS when there is no internet
These images come from the app itself; the values on screen are from a sample installation.

What it has

  • 2 relays, 4 × 24 V outputs
  • 4 digital inputs (door, float switch, thermostat contact)
  • SMS commands: DURUM, ROLE1 AC, ROLE1 KAPAT, CIKIS1-4, YENIDEN BASLAT
  • Up to 3 authorised numbers that may send commands
  • Automatic switching between wired network, Wi-Fi and mobile line
  • Ambient temperature and humidity, up to 8 temperature probes
The same data on your phone, at the same moment

What it gives you

From your phone, confirmed

When you tap a switch in the app the command goes to the device and the device reports back once it has applied it. What you see is the real state of the relay.

SMS when there is no internet

If the mobile line has no data either, texting ROLE1 AC from an authorised number is enough. Which number sent which command is written to the event log.

Tells you about outages

You get an SMS when the site loses its internet and when it comes back, and when the device starts up again after a power cut. The length of the outage is recorded.

Frequently asked

What is the difference between a GSM relay and a Wi-Fi relay?

A Wi-Fi relay only works over the local internet; once the router is off you cannot reach it. The SRD tries the wired network, Wi-Fi and the mobile line in turn, and takes SMS commands when there is no internet at all.

Which numbers can send commands?

Only the up to three numbers you set in the app. An SMS from any other number is not carried out and is logged.

What kind of SIM card do I need?

Any line that can send and receive SMS. SMS commands need no data plan; data is only used to reach the platform when there is no wired network or Wi-Fi.

What happens to the outputs if the connection drops?

You can enable connection-loss protection: if the device cannot reach the server for longer than the time you set, it switches the outputs and relays off and sends an SMS.

When will it be available?

The SRD is in field trials. Tell us about your setup and we will get back to you with details and a demo.

Let's look at how it would work on your site

Tell us about your setup and we will work out which model and which measurements you need.

info@elanka.com.tr +90 312 870 11 34